Let’s talk about the 460mm 3000W Halogen Lamp
If you need heat—and you need it now—this is the bulb for you. We designed this 460mm halogen lamp for those high-intensity jobs where waiting for a slow warm-up just isn’t an option. It plugs into a standard 230V supply and cranks out 3000W of shortwave infrared energy. Because we’ve packed that much power into this specific length, the heat density is incredibly intense. The secret sauce inside the tube Running 3000W over a 460mm area means the filament gets blistering hot. Normally, that would kill a bulb pretty quickly. But we use a halogen gas inside the quartz tube to stop the filament from evaporating. Think of it as a recycling system: the halogen gas pushes the tungsten back onto the filament. This keeps the lamp from burning out too soon, even when you’re pushing it hard. The result? A concentrated beam of heat that sinks into your materials way faster than those old medium or longwave heaters. Getting it installed We kept the connectors standard. Why? Because we want this to be a simple drop-in replacement for your existing heating banks. No fuss. We used quartz glass because it can handle the “thermal shock” of being switched on and off rapidly without shattering. But here is a pro tip:**Keep the glass spotless.**Seriously. If you leave fingerprints or oil smudges on the quartz, it creates hot spots. Those hot spots can crack the tube, and then you’ve got a mess on your hands. A few things to watch out for This lamp is a beast, but it’s hungry. It puts a massive load on your power circuit, so double-check your wiring and contactors. You need to make sure they can actually handle a full 3000W draw per bulb. Also, shortwave IR is aggressive. If your distance isn’t dialed in just right, you might accidentally scorch your material. And if you’re using these in a PET blowing or curing line, don’t forget the airflow. Make sure your cooling fans are beefy enough to pull the ambient heat away from the housings. If you don’t, your electronics might just fry.