Technical Specifications and Application of the 480mm 235V 2000W Halogen Infrared Lamp

September 14, 2026

Let’s talk about the 480mm Halogen IR Heater

When you need a massive amount of heat—and you need it now—most standard heaters just won’t cut it. That’s why we built this 480mm Halogen Infrared lamp. It’s designed for those high-intensity jobs where you can’t afford to wait around for things to warm up. If you’re doing industrial drying or molding plastics, this 2000W setup is usually the sweet spot. The power behind it At 2000W, this thing packs a serious punch into a 480mm quartz tube. We set the voltage at 235V because it just works better with most industrial grids. The best part? You don’t have to mess around with complicated transformers. You flip the switch, and the heat hits your target almost instantly. It’s fast. Really fast. Why the halogen and quartz matter Ever notice how some lamps get dark or cloudy over time? We fixed that. By using a halogen gas fill, we stop the tungsten filament from evaporating and gunking up the inside of the tube. It stays clear, which means it stays efficient. Then there’s the quartz. If your system is constantly clicking on and off, a cheap tube would just crack from the temperature shock. The quartz we use can handle those wild swings without breaking a sweat. Getting it into your workflow Most people use these as a quick swap for PET blowing machines or powder coating lines. Since it’s 480mm long, you get a wide area of heat without having to crowd your machine with a dozen smaller bulbs. But here is the thing: 2000W is a lot of energy in one spot. You’ve got to get your reflectors right. If that heat bounces back into the housing and you don’t have enough airflow, you’re going to melt your sockets or fry your wiring. Also, just a heads-up—make sure your controller can handle that initial “kick” of current when you first start it up cold.