Wholesale quartz halogen heat lamp ir lamp 320mm 220vac 1000w

May 3, 2026

Introduction

We built the 1000W quartz halogen heat lamp to be a straight-shooting infrared heater—tough enough for the plant floor, and simple enough to use where you need spot heat fast. If you’re an engineer running spot heating, drying a process, or curing materials, this was made with you in mind. The numbers aren’t random: 1000W, 220V, and a 320mm tube. They add up to heat you can count on, in a size that fits.

Power, Voltage, and Size—Why These Numbers Matter

That 1000W rating means serious thermal punch. It wakes up fast and delivers high heat density—perfect when you need quick, focused warmth. And the 220VAC? That’s the sweet spot for industrial power. It plugs right into standard circuits, so you don’t have to rewire the whole setup or hunt down custom transformers. The 320mm length is a smart compromise, too. Long enough to spread the heat evenly, but not so long it fights for space. It slips into tight bays and cramped zones without a struggle. One thing to keep in mind: with 1000W, airflow matters. Make sure the surrounding equipment can breathe. If the enclosure is too small or poorly ventilated, heat builds up and components wear out sooner. Plan your mount and cooling like you mean it.

What It’s Made Of—Quartz, Halogen, and Mounting That Just Works

The envelope is quartz because it can handle high temps and the shock of heating up and cooling down again and again without cracking under pressure. Inside, the halogen cycle keeps the filament stable. It redeposits material as it evaporates, so output stays steady over the life of the lamp and the glass stays clear. No dimming, no blackening. Mounting is the kind of detail that makes your day easier. This lamp is built to drop straight into existing fixtures—no redesign needed. The end fittings give you solid contact and a clean install, so you can wire it quickly and keep polarity straight without guesswork.

Where It Shines—Real-World Heat, No Drama

This is your go-to when you need fast, localized heat: pre-heating molds, drying coatings, or holding temperature on a production line. The combo of 220V compatibility, 1000W output, and that 320mm form factor gives you predictable heat that’s easy to work with. The payoff is simple: it responds quickly, holds steady, and installs like a straightforward replacement in standard fixtures. Give it proper clearance and cooling, and it keeps performing—day after day, in continuous industrial duty.